2″ Pulsar DP20HCI178F 10HP Diesel High Pressure Water Pump – 85m Head

Product Overview

The 2″ Pulsar DP20HCI178F 10HP Diesel High Pressure Water Pump is a powerful heavy-duty pumping solution designed for applications that require strong water pressure and dependable water delivery.

Powered by a robust 10HP diesel engine, this pump provides reliable mechanical power for demanding agricultural, commercial, and general-purpose pumping applications.

With a maximum head of up to 85 metres and a 2-inch inlet and outlet configuration, the DP20HCI178F is ideal for irrigation, elevated tank filling, long-distance water transfer, farm water distribution, and other high-pressure pumping applications.

Its diesel-powered operation makes it suitable for remote locations where electricity may be unavailable, while the high-pressure design allows water to be delivered over substantial elevation and distance when properly installed.

System Design & Configuration

10HP Diesel Engine

Powered by a strong 10HP diesel engine designed to deliver dependable performance for demanding water pumping applications.

85m Maximum Head

Provides a maximum pumping head of up to 85 metres, making it suitable for applications requiring significant pressure or water delivery to elevated locations.

2-Inch Pump Configuration

Features a 2-inch inlet and outlet, providing a practical combination of water flow and high-pressure performance.

High-Pressure Pumping

Designed specifically for applications that require stronger pressure than conventional general-purpose water pumps.

Diesel-Powered Operation

Operates independently of mains electricity, making it ideal for farms, remote locations, construction sites, and off-grid pumping applications.

Heavy-Duty Design

Built for demanding water transfer applications requiring powerful and reliable operation.

Technical Specifications

Key Features

• Powerful 10HP diesel engine
• 2-inch inlet and outlet
• Maximum head of up to 85 metres
• High-pressure water delivery
• Heavy-duty construction
• Reliable diesel-powered operation
• Suitable for irrigation
• Ideal for elevated tank filling
• Suitable for long-distance water transfer
• Suitable for agricultural applications
• Strong water pressure performance
• Suitable for remote locations
• Practical and portable pumping solution
• Reliable for demanding pumping applications
• Suitable for farm water distribution
• Durable design for regular operation

Applications

High-Pressure Irrigation

Suitable for agricultural irrigation systems that require strong water pressure.

Elevated Tank Filling

Ideal for transferring water to elevated storage tanks where additional pumping head is required.

Long-Distance Water Transfer

Suitable for moving water over longer delivery lines where sufficient pressure is required.

Farm Water Supply

Can be used for crop irrigation, livestock water supply, and general farm water distribution.

Water Transfer

Suitable for transferring water from dams, ponds, reservoirs, and other water sources.

Sprinkler Irrigation

Can be used with compatible sprinkler irrigation systems where the required pressure and flow fall within the pump’s operating range.

Remote Locations

Its diesel-powered design allows it to operate in areas without electricity.

Commercial Pumping

Suitable for demanding agricultural and commercial water transfer applications.

Installation Guidelines

• Position the pump on a firm and level surface
• Keep the pump as close to the water source as practical
• Use compatible 2-inch suction and delivery pipes
• Ensure all suction connections are completely airtight
• Install a suitable suction strainer or foot valve
• Prime the pump with clean water before starting
• Check engine oil before operation
• Fill the fuel tank with clean diesel
• Use pressure-rated delivery pipes and fittings
• Avoid unnecessary bends in the pipework
• Secure all connections properly
• Ensure adequate ventilation around the diesel engine
• Never operate the pump dry
• Confirm that connected equipment can safely handle the pump pressure

Maintenance & Operation

• Check engine oil before every operation
• Change engine oil according to the recommended service schedule
• Clean or replace the air filter when required
• Inspect the diesel fuel system regularly
• Use clean diesel fuel
• Check suction and delivery pipes for leaks
• Tighten loose fittings and connections
• Inspect the pump casing regularly
• Remove debris from the suction strainer
• Keep engine cooling areas clean
• Drain the pump before extended storage
• Inspect the pump if pressure or flow reduces significantly
• Check delivery piping for damage caused by excessive pressure
• Carry out regular preventive maintenance

Best Practices

Recommended

• Prime the pump before starting
• Use clean diesel fuel
• Check engine oil before every operation
• Use correct 2-inch hoses or pipes
• Use pressure-rated delivery fittings
• Install a suitable suction strainer
• Keep the suction line airtight
• Operate the pump on stable ground
• Carry out routine maintenance
• Inspect all connections before starting
• Match the pump correctly to the irrigation or water system

Avoid

• Running the pump without water
• Operating with insufficient engine oil
• Using contaminated diesel fuel
• Using damaged suction hoses
• Allowing air leaks into the suction line
• Using delivery pipes not rated for the pressure
• Operating in poorly ventilated areas
• Blocking the discharge line
• Ignoring unusual engine noises or vibration
• Operating outside the recommended pumping conditions

Compatibility

Suitable for use with compatible:

• 2-inch suction pipes
• 2-inch high-pressure delivery pipes
• Farm irrigation systems
• Sprinkler irrigation systems
• Elevated water tanks
• Agricultural water distribution systems
• Dams and ponds
• Reservoirs
• Long-distance water transfer lines
• Commercial water pumping systems

Performance Overview

Actual pumping performance depends on suction depth, delivery height, pipe length, pipe diameter, fittings, installation quality, maintenance, and operating conditions.

Frequently Asked Questions

What size is the Pulsar DP20HCI178F water pump?

The pump features a 2-inch inlet and outlet.

How powerful is the engine?

The Pulsar DP20HCI178F is powered by a 10HP diesel engine.

What is the maximum head?

The pump has a maximum head of up to 85 metres.

What fuel does it use?

It operates on diesel fuel.

Is it a high-pressure water pump?

Yes. The DP20HCI178F is designed for high-pressure water pumping applications.

Can it pump water uphill?

Yes. With a maximum head of up to 85m, it is suitable for substantial elevation pumping, depending on suction depth, pipe length, fittings, and overall system design.

Can it fill elevated water tanks?

Yes. Its high-head capability makes it suitable for filling elevated tanks where the total system head is within the pump’s operating range.

Is it suitable for irrigation?

Yes. It is ideal for farm irrigation, water distribution, and compatible sprinkler systems.

Can it work without electricity?

Yes. The pump is diesel powered and operates independently of mains electricity.

Is it suitable for long-distance water transfer?

Yes. Its high-pressure capability makes it suitable for longer-distance water transfer when the piping system is correctly sized and installed.

Why Choose the 2″ Pulsar DP20HCI178F 10HP Diesel High Pressure Water Pump

• Powerful 10HP diesel engine
• High-pressure water delivery
• Up to 85m maximum head
• Practical 2-inch pump size
• Suitable for irrigation
• Ideal for elevated tank filling
• Suitable for long-distance water transfer
• Excellent for farm water distribution
• Diesel powered for remote operation
• Heavy-duty construction
• Suitable for demanding applications
• Strong and dependable pumping performance
• Versatile agricultural and commercial water pump